Before You Start
• Consult a qualified technician for instructions. Dual always recommends professional
installation.
• Remove 2 transit screws located on top of the unit (if applicable).
Installation Process
1. Connect wiring harness. Consult a qualified technician if you are unsure.
2. Mount the head unit using brackets.
3. Connect wiring harness and antenna. Test the head unit for correct operation.
4. Screw the left and right mounting brackets into head unit and fix the head unit into the
RV cabinet.
5. Put the trim ring on the head unit.
Preparation
Step 1:
Step 2:
Step 3:
Dashboard or Installation Kit
Install the AXV150BT into
the RV Cabinet
Screw the AVX150BT mounting brackets
into the RV Cabinet.
Put the trim ring on the AXV150BT.
Dashboard or Installation Kit
AXV150BT
Dashboard or Installation Kit
Trim ring
AXV150BT
AXV150BT
Screw
To Next Page
Loading...
