What to do if my Ayce MFPH32-1280 Air Conditioner LED displays failure code “E4”?
If your Ayce Air Conditioner displays the failure code “E4”, it indicates a water-full warning. To resolve this, drain out the water.
Why my Ayce MFPH32-1280 machine fails to start up?
If your Ayce Air Conditioner is not starting up, it could be due to a power supply failure. Check if it is plugged in. If the plug or socket is damaged, replace it. If the fuse is broken, have it replaced by a service provider, using a 15A/250VAC specification fuse.
What to do if my Ayce MFPH32-1280 Air Conditioner runs but no cooling?
If your Ayce Air Conditioner runs but provides no cooling, the air filter may be dirty, so please clean it.
How to fix Ayce Air Conditioner that does not run?
If your Ayce Air Conditioner does not run, wait 3 minutes and start it again. The protector device may be preventing the unit from working.
What does failure code “E2” mean on my Ayce Air Conditioner?
If your Ayce Air Conditioner displays the failure code “E2”, it means the room temperature sensor has failed or is damaged. Replace the room temperature sensor to fix this.
Why my Ayce MFPH32-1280 Air Conditioner runs for a short while only?
If your Ayce Air Conditioner only runs for a short while, it might be because the set temperature is close to the room temperature. You can lower the set temperature. Also, check if the air outlet is blocked by an obstacle; if so, remove the obstacle.
What does error code “E3” mean on Ayce Air Conditioner?
If your Ayce Air Conditioner displays the failure code “E3”, it indicates that the evaporator oil pipe sensor has failed or is damaged. Replace the evaporator coil pipe sensor.
What to do if Ayce Air Conditioner shows failure code “E5”?
If your Ayce Air Conditioner displays the failure code “E5”, it means the condenser coil pipe sensor has failed or is damaged. Replace the condenser coil pipe sensor.
What to do if Ayce Air Conditioner does not run and shows water full indicator "E4"?
If your Ayce Air Conditioner does not run and the water full indicator "E4" is on, pull out the rubber plug to drain the water. If this happens often, contact a qualified service center.
How to prevent water leak during moving Ayce Air Conditioner?
To prevent water leakage from your Ayce Air Conditioner during moving, drain the condensate before moving it and locate the unit on flat ground.
Read all instructions and cautionary markings before using this appliance.
Description of buttons, indicators, and basic operation functions.
Instructions for cleaning the main unit and its parts.
Procedures for cleaning and maintaining the air filter.
Guidance on diagnosing and resolving common operational problems.
Solutions for failures like not starting, auto-stopping, and cooling/heating problems.
General| Brand | Ayce |
|---|---|
| Model | MFPH32-1280 |
| Category | Air Conditioner |
| Language | English |
To Next Page
