10
Digital door viewer 754
When fitting the door viewer camera, fisrt unscrew the camera ba-
rrel and insert the door viewer camera into the peephole with the
arrow points up. After the camera is well positioned, screw up the
locking barrel from inside door.
DO NOT rotate the camera from out side door, this could damage
the camera. Also DO NOT rotate camera when disassembling this
product.
CORRECT
INCORRECT
WARNING!
Make sure you assemble the doorbell camera
carefully.
IF THE CAMERA WIRE IS PULLED OR FOLDED,
this could damage the product.
Do not rotate the out door
camera when assembling
Rotate the out door camera
when assembling
To Next Page
Loading...
