To Next PageTo Next Page
Need help?Do you have a question about the Ayra ComPar KIT 1 MKII and is the answer not in the manual?
General| Light source | LED |
|---|---|
| LED quantity | 12 |
| LED colour | RGB |
| Beam angle | 25° |
| MIDI | No |
| USB | No |
| DMX channels | 4 |
| Included | power cable |
| Channels | 4 |
| Inputs | 3-pin XLR |
| Outputs | DMX (3-pin XLR) |
| Compatibility | DMX512 |
Key safety and health precautions for operating the device, including handling power cords and avoiding hazardous conditions.
Specifies intended use, environmental conditions, and proper operational practices for the device.
Instructions for safe storage and transport of the device, including packaging and environmental considerations.
Guidelines for inspecting the device's housing for damage, corrosion, and ensuring secure connectors.
Information on locating, identifying, and safely replacing the device's fuses.
Procedures for checking the unit and accessories for damage before use, and storage recommendations.
Details on AC power inputs, outputs, and their associated fuses, including load capacities and safety notices.
Explanation of display codes and various operational modes (DMX, Slave, Show, Sound, etc.) for the unit.
Details on the functions of the foot controller, including suspend, strobe, color selection, and show selection.
Description of different operating modes: Stand-alone, Music controlled, Master/slave, and DMX.
Details the DMX channels and values for 1-channel mode, including chase and show functions.
Details the DMX channels and values for 3-channel mode (RGB).
Details the DMX channels and values for 7-channel mode (RGB, Dimmer, Strobe, Color chase, Speed).
Details the DMX channels and values for 12-channel mode.
Details the DMX channels and values for 16-channel mode.
Instructions for mounting the system on a standard lighting or loudspeaker stand.
Guidance for using the fixture as a floor spot, including display inversion.
Safety precautions and methods for installing the system on a truss construction.
Recommendations for protecting the fixture during mobile transport using bags.
Procedure for safely replacing internal fuses, including warnings and troubleshooting advice.
Information on contacting dealers for internal component repairs or spare parts.
Instructions for cleaning the fixture's housing with a damp cloth, with safety warnings.
Guidance on cleaning the fixture's lenses and optics using appropriate methods.
Checklist for ensuring the fixture, its components, and installation spot are in optimal condition.
Diagrams and explanations for DMX connections and electrical wiring, including pinouts.
Troubleshooting steps for when the fixture fails to power on, covering blown fuses and power connections.
Solutions for DMX communication issues, including address settings, blackout functions, and cable faults.
Troubleshooting sound-activated mode, checking working mode and microphone sensitivity.
Diagnosing low light output, checking optics for dirt and ensuring dimmer levels are set correctly.
Addressing intermittent DMX signal loss, flickering, or odd behavior due to cable issues or interference.
Resolving issues where not all DMX channels function, checking channel mode and signal integrity.
Overview of the system's capabilities, including modes, DMX channels, and power requirements.
Specifications for the LED light sources used in ComPar KIT 1 and ComPar KIT 2.
Details on individual projector design, cooling, and beam adjustment capabilities.
Listing of DMX, power, and foot controller connectors used on the fixture.
List of items included in the package, such as stands, bags, cables, and foot controller.
