Need help?Do you have a question about the Ayra ERO 406 and is the answer not in the manual?
Lighting Specifications| light source | 4x 18 W RGBAW+UV LED |
|---|---|
| dispersion angle | 26 degrees |
| full output | 7800 lux |
| red light output | 1, 000 Lux |
| green light output | 1, 500 lux |
| blue light output | 1, 500 lux |
| white light output | 2, 000 lux |
| amber light output | 900 Lux |
| UV light output | 900 Lux |
Power| fuse | F3AL 250V |
|---|---|
| power supply | 90-240V AC, 50/60 Hz |
| maximum power consumption | 51.5 W |
| power consumption | 0.426 A |
| power factor | 0.515 |
Operating Environment| environmental temperature | 0 - 40 degrees Celsius |
|---|---|
| housing temperature during normal use | 32 degrees Celsius |
Weight and Dimensions| dimensions | 195 x 135 x 235 mm |
|---|---|
| weight | 3.3 kg |
Provides guidance on operating the device, including general usage and precautions.
Setting the starting DMX channel for device communication.
Choosing between different DMX channel modes for control.
Configuring devices to sync operations in a Master/Slave setup.
Device operates using built-in programs, independent of external signals.
Provides comprehensive control over all device functions via DMX.
Troubleshooting steps for when the device fails to power on.
Solutions for issues where the device does not respond to DMX signals.
Troubleshooting steps for when the device does not respond to audio input.
Solutions for DMX signal issues like interruptions or erratic behavior.
To Next Page
