To Next PageTo Next Page
Need help?Do you have a question about the Ayra ERO 150BSW and is the answer not in the manual?
Lighting Specifications| light source power | 150 W |
|---|---|
| beam angle (fully open) | 11 Degrees |
| beam angle with beam reducers | 2, 4, 6, 8, 10 Degrees |
| beam angle with zoom lens | 3, 6, 9, 12, 15, 20 Degrees |
| spot beam angle with fixed Gobos and zoom lens | 2 to 15 Degrees |
| spot beam angle with rotating Gobos and zoom lens | 10 to 17 Degrees |
| wash beam angle | 15 to 28 Degrees |
Pan and Tilt| pan range | 540 Degrees |
|---|---|
| tilt range | 270 Degrees |
| automatic pan and tilt correction | Yes |
Power and Temperature| power supply | 100 - 240V AC, 50/60 Hz |
|---|---|
| maximum power consumption | 189 Watt |
| fuse | T6.3A 250V |
| maximum temperature of housing | 33 Degrees |
| operating temperature range | 0 to 40 Degrees Celsius |
Weight and Dimensions| dimensions | 453 x 290 x 256 mm |
|---|---|
| weight | 12 kg |
Critical warnings regarding moisture, power sockets, and internal wiring to prevent shocks.
Requirements for qualified personnel, device condition, and user-repair limitations.
Steps to activate the device, automatic startup behavior, and menu navigation.
How to set DMX address, channel mode, and handle DMX signal loss.
Instructions for upright placement, suspended use with brackets, and safety cable attachment.
Solutions for devices not turning on, not reacting to DMX signals, or DMX indication problems.
Solutions for sound-related issues, minimal light output, and dimmer problems.
Solutions for interrupted DMX signals, operation mode changes, and projection sharpness.
