Need help?Do you have a question about the Ayra ERO 540 and is the answer not in the manual?
Light Source| light source | 14 Watt RGB LED chip |
|---|---|
| lifespan LED module | 50, 000 h |
Movement| pan range | 540 degrees |
|---|---|
| tilt range | 270 degrees |
| beam angle | 13 degrees |
Power| power consumption | 60W max |
|---|---|
| fuse | 1A 250V 20mm glass fast blow |
| power supply | 110-240V AC, 50/60Hz |
Connectors| DMX | 3p XLR male and female |
|---|---|
| power connector | IEC power connector |
| minimum distance from flammable surfaces | 0.5 m |
Weight and Dimensions| measurements | 175 x 175 x 250 mm (without bracket) |
|---|---|
| weight | 5 kg |
| maximum housing temperature | 55 degrees Celsius |
Covers eye injury, adult supervision, and direct beam observation warnings.
Details power supply check, professional installation, safety cables, and mounting methods.
Explains cleaning, avoiding dust, damp cloths, and protecting from moisture.
Lists included items: movinghead, power cable, bracket, and hardware bag.
Guidelines for checking power cable, unit condition, and safe usage before operation.
Identifies and describes primary parts like beam output, control panel, focus, fan, and connectors.
Explains powering on, motor calibration process, and default mode.
Covers DMX starting address setting and available DMX modes (5/13 channel).
Details functions for channels 1-4 (Pan, Tilt, Dimmer/Strobe, Color Macros).
Details Channel 5 functions for Gobo and Gobo shake effects.
Covers channels 1-6 for Pan/Tilt (including 16-bit) and Dimmer/Strobe.
Details channels 7-12 for RGB control, speed, and motion macros.
Covers channel 13 for Gobo and Gobo shake effects.
Explains how to use automatic (fast/slow) and music-synchronized modes.
Guides on setting up master and slave units for synchronized lightshows.
Covers PAN/TILT reverse, display reversal, and setting movement angles.
Explains DMX channel modes, resetting, and restoring factory settings.
Details bracket installation, unit cleaning, and fan vent maintenance.
Covers safe transport, fuse replacement, and notes on spare parts.
Explains how to adjust the focus for sharp beams and gobo projections.
Checklist for ensuring screws, corrosion, exterior, and electrical components are optimal.
Details DMX connector pinouts and electrical wiring schematics.
Lists technical data: light source, ranges, modes, DMX, gobos, beam angle, temp, power, weight.
Outlines connector types (DMX, Power) and included accessories.
To Next Page
