Need help?Do you have a question about the Ayra IntenZ CB700 and is the answer not in the manual?
General| Model | IntenZ CB700 |
|---|---|
| Category | Light Fixture |
| Pan | 540° |
| Tilt | 270° |
| Frequency | 50/60Hz |
| Cooling | Fan cooled |
| Lamp | LED |
| Voltage | 100-240V |
| CRI | >80 |
| Dimming | 0-100% |
| Control | DMX, Master/Slave |
| Housing Material | Metal |
Lists all items included in the package with the fixture.
Advises users to check for damage upon receiving the product.
Warns about electric shocks from moisture.
Advises connecting to correct power socket to prevent damage.
Warns about touching internal wires, risking electric shocks.
Outlines user qualifications and responsibilities for safe operation.
Provides crucial safety guidelines for handling and using the device.
Advises on proper cable use and avoiding damage.
Specifies requirements for stable AC and grounded power supply.
Details handling temperature changes to prevent moisture.
Defines intended use and environments for the device.
Warns against misuse, force, and emphasizes user familiarity.
Provides guidelines for mobile use, packaging, and storage.
Details regular checks for housing integrity and corrosion.
Explains proper disposal procedures for electronic equipment.
Indicates compliance with European norms and requirements.
Specifies that the product is designed exclusively for indoor use.
Identifies and labels the various parts of the device.
Describes the DMX input and output connections.
Explains how to activate the device by plugging it into a power source.
Details how to navigate the device's menu and adjust settings.
Lists the available menu options and their functions.
Explains how to set the DMX start address for device control.
Describes the different DMX channel modes available for control.
Explains the pre-programmed shows and speed/sound adjustments.
Details automatic mode, including shows, speed, and sound control.
Explains how the device reacts to music via its internal microphone.
Describes how to sync multiple devices in a Master-Slave configuration.
Covers advanced options like dimmer curves, display settings, and LED calibration.
Details how the device behaves during DMX signal loss.
Details the functions and values for the 6-channel DMX mode.
Details the functions and values for the 9-channel DMX mode.
Emphasizes child safety and device positioning during installation.
Details requirements for placing the device upright on surfaces.
Explains methods for suspending the device using included or separate hardware.
Stresses the importance of a safety cable for suspended installations.
Warns users not to look directly into the light source.
Explains the cooling system and the need to keep vents clear.
States that the product has no spare parts and requires specialist repair.
Provides instructions for cleaning the device's exterior and checking screws.
Explains the power input and output connectors for linking devices.
Explains the function and use of a DMX terminator.
Lists possible causes and solutions for the device not powering on.
Addresses issues where the device does not respond to DMX signals.
Explains why the device might not react to sound or music.
Provides solutions for issues causing low light output.
Covers problems like flashing or strange behavior due to signal issues.
Lists the fundamental features and capabilities of the device.
Provides detailed technical data like light source, modes, power, and dimensions.
Specifies the beam angle of the light output.
Lists lux values for red, green, blue, white, and full RGBW at 1m.
Repeats the list of items included in the product packaging.
To Next Page
