The linked components may be
joined in any convenient
order.
The linked components should be connected in
daisy-chain fashion, connecting each component to
another until all of the linked components have
been connected.
When connecting the linked
components to form a chain, be careful
not to connect the two ends of the
chain. Closing the chain to form a loop
will cause the AyreLink system not to
function.
Break-In
100 to 500 hours of music
played through the system will
ensure full break-in.
Due to the manufacturing processes used for the
wires, capacitors, and circuit board materials, a
break-in period is necessary for the amplifier to
reach its full sonic potential.
Each input uses a different physical path on the
input circuit board. Therefore a separate break-in
period is required for each input.
6
To Next Page
Loading...
