Need help?Do you have a question about the Ayre VX-5 and is the answer not in the manual?
General| Number of Channels | 2 |
|---|---|
| Gain | 26 dB |
| Total Harmonic Distortion | < 0.1%, 1 kHz, full power |
| Input Impedance | 1 MΩ |
| Inputs | RCA, XLR |
| Outputs | Speaker binding posts |
| Signal-to-Noise Ratio | >100dB |
| Frequency Response | DC – 250 kHz, -3 dB |
Guidance on locating the amplifier for optimal cooling and preventing interference.
Details on using balanced XLR and single-ended RCA inputs for audio sources.
Information on connecting speakers, including spade lug compatibility and avoiding ground connections.
Instructions for connecting the amplifier to a wall outlet, including RFI filtering.
Setup and use of AyreLink ports for system control and intercomponent communication.
Explanation of the necessary break-in process for optimal sonic performance.
Location and function of the main AC power rocker switch on the rear panel.
Using the front-panel button for muting audio and entering low-power consumption mode.
Procedure to configure the brightness of the front-panel status LED.
Setting up trigger inputs for controlling power states and system automation.
Key performance metrics including power output, impedance, gain, and frequency response.
Details on power consumption, dimensions, weight, and input polarity.
Diagnosing and resolving overheating issues, including LED indicators and protection modes.
Troubleshooting blown fuses and problems related to AC line voltage fluctuations.
Identifying and addressing DC offset at the output terminals that may harm speakers.
Details on the ninety-day warranty and the option to extend coverage to five years.
Information on warranty terms and service for customers outside North America.
To Next Page
