- 15 -
For Linux users, download a file with the extension .tar.xz, which has to be
extracted. When it is extracted, go to the extracted directory and open the
terminal in that directory. Two .sh scripts have to be executed, the first called
arduino-linux-setup.sh and the second called install.sh.
To run the first script in the terminal, open the terminal in the extracted directory
and run the following command:
sh arduino-linux-setup.sh user_name
user_name - is the name of a superuser in the Linux operating system. A
password for the superuser has to be entered when the command is started.
Wait for a few minutes for the script to complete everything.
The second script called install.sh script has to be used after installation of the
first script. Run the following command in the terminal (extracted directory): sh
install.sh
After the installation of these scripts, go to the All Apps, where the Arduino IDE is
installed.
To Next Page
Loading...