Azbil HY7045T1000 - Page 3

3
AB-7521

CAUTION

General
Use this product under the operating
conditions (for temperature, humidity,
power, vibration, shock, mounting
location, atmosphere, etc.) listed in the
specications.
Failure to do so may cause fire or
device failure.

General
Take anti-lightning surge measures
based on regional and building
characteristics.
Lightning may cause fire or critical
damage to this product if protective
measures are not taken.

General
Provide a power circuit breaker for the
power source to this product.
The product does not have a power
switch.

General
For the sake of safety, installation and
wiring must be performed by qualified
personnel in accordance with all
applicable safety standards.
Failure to do so may cause fire or
electric shock.

Prohibition
Do not put a load or weight on this
product.
Doing so may damage the product.

General
All wiring must comply with applicable
codes and ordinances.
Otherwise there is a danger of re.

CAUTION

Prohibition
Do not disassemble or modify this
product.
Doing so may cause device failure or
electric shock.

General
If more than the rated power voltage
is accidentally applied to this product,
replace the product with a new one for
your safety.
Failure to do so may cause device
failure or cause overheat.

General
After wiring, attach the cover.
Failure to do so may result in electric
shock or device failure.

General
To connect the wires to the product,
use crimp terminal lugs with insulation.
Failure to do so may cause short circuit
leading to re or device failure.

General
When installing the product, be sure to
connect the wires securely. Failure to
do so may result in measurement error
or cause overheating or device failure.
IMPORTANT
•
Do not use transceivers or low-power
wireless devices near this product.
Doing so may cause radio wave
interference and malfunction of the
product.