10087 UK 09 - 2004
Technical information: M02 / CAPRICCIO 7
Only the third and subsequent services of ground coffee should be used after regulating
the new “grind point”
4. Display
El display is comprised of four 7-segment displays that can show four digits.
5. Programming button
Pressing on this button gives access to the deferent programming functions on these coffee
grinders.
6. button
Pressing on this button increases the value of the function you are programming.
There is no button to decrease a value. To decrease a value it is necessary to advance
through the values until you loop back to the beginning to choose a lower value.
7. button
This button is used to programme a dose of ground coffee that the grinder supplies for a single
coffee. The doses that can be programmed are:
• Measuring in time: 1 second minimum and 7 seconds maximum with increments of 0.05
seconds.
• Measuring in grams: 5 grams minimum and 20 grams maximum with increments of 0.5
grams.
8. button
This button is used to programme a dose of ground coffee that the grinder supplies for two
coffees. The doses that can be programmed are:
• Measuring in time: 1 second minimum and 7 seconds maximum with increments of 0.05
seconds.
• Measuring in grams: 5 grams minimum and 20 grams maximum with increments of 0.5
grams.
To Next Page
Loading...
