10087 UK 09 - 2004
Technical information: M02 / CAPRICCIO 8
9. ON/OFF button
On the grinders that have a display, this button is used to switch the grinder on and off.
10. Programming button
This button is only on the grinders that do not have a display. It is used to go from “working
mode” to “programming mode”.
10. Coffee presser
This is used to compress the ground coffee in the filter holder. This will provide an adequate
infusion of the coffee.
The grinders have a 55 mm presser that coincides with the standard filter holder on the
market. For filter holders with different diameters it is necessary to substitute the presser for
another that is the correct diameter.
11. Micro switches
Activating the micro switches with the filter holder will dose the corresponding dose of ground
coffee into the filter holder.
12. FILTER HOLDER guide
Its function is to make the loading of the ground coffee into the filter holder easier. The
grinders have filter holder guide that coincides with the standard filter holder on the market.
For filter holders with different diameters it is necessary to substitute the filter holder guide for
another that is the same diameter.
13. Residue tray
Made of POM, this element collects the coffee grinds that fall from the filter holders during the
loading process.
To Next Page
