10087 UK 09 - 2004
Technical information: M02 / CAPRICCIO 9
14. Mains switch
This is used to switch the grinder on or off. It connects and disconnects both phases of the
mains.
15. Mains flex
It is 1500 mm long. The plug is Schucco.
16. Housing
It is divided into two pieces: the front made of aluminium and the casing made of sheet metal.
To remove the housing, follow these instructions:
• Remove the coffee hopper.
• Soltar los cuatro tornillos que fijan la envolvente.
18. Grinder
Technical Characteristics:
To Next Page
