1ª 10155 ES 9 - 2009
44
With a Phillips screwdriver, loosen
the three screws shown with the red
arrows. Lift and tilt down the
keyboard support assembly.
While tilted back, access to the
Product labels and/or to the boards
of the Product selection buttons is
easy.
Optionally, the series STEP can have digital prices
3.1.7. Checking and starting up
Close the door and introduce credit, carry out as a minimum one service from each channel.
Check the extraction, the change in all the types of coin and the correct programming of prices.
When you finish this test, enter into the programming and check the accounting figures (function
120 TOTAL MONEY) and, once checked, reset them to zero (function 171 BOR. CONT.)
To Next Page
Loading...
