LOWRIDER OWNER’S MANUAL PAGE 18
01-2018
1.) Remove the propane tank from the machine, or disconnect the connection and securely
fasten tank to machine. Adjust handle of machine to comfortable position to tilt back.
2.) Pull the LowRider in reverse behind you, or push forward by slightly tilting the machine back,
raising the brush off floor.
3.) When loading up a ramp into a vehicle, the machine should be pulled back rather than pushed
forward, to prevent tipping over.
STORING THE MACHINE AND PROPANE TANKS
Once the job is complete for the day/night, remove the propane tank from the machine and store
the tank in a well ventilated approved area. Complete the MACHINE CLEAN UP list on pg 17, and
follow steps for TRANSPORTING THE MACHINE on pg 17-18. Store your machine in a safe and
secure area. Refer to the SAFETY INFORMATION on pgs 3-9.
NOTES:
To Next Page
Loading...
