Aztech HL110E User Manual

User Manual
Page 8 of 40
Label
LabelLabel
Label Status
StatusStatus
Status Description/ Function
Description/ FunctionDescription/ Function
Description/ Function
A
Simple Connect
Simple ConnectSimple Connect
Simple Connect
Press to create or join a HomePlug AV network. It can
also be used to reset the Private Network Name to a
random key.
Blinking
slowly
When LED is blinking slowly in Green color HomePlug AV
is on a Power Saving status.
Off No power.
B
Power
PowerPower
Power
On
•
After Simple Connect is pressed for two
seconds, this LED will blink to confirm the
button press.
•
When Simple Connect is pressed for 10
seconds, this LED will blink to confirm the
Private Network Name reset.
Off Device is not connected to a HomePlug AV network.
C
Powerline Activity
Powerline ActivityPowerline Activity
Powerline Activity
On • This LED remains on when the device is part of
a HomePlug AV network.
• The LED colors represents the connection rate
within the HomePlug AV network whether it is
good (red), better (amber), or best (green).
• The LED flashes to indicate network activity.
Off An Ethernet device is not connected.
D Ethernet Activity
Ethernet ActivityEthernet Activity
Ethernet Activity
On
•
An Ethernet device is connected.
•
The LED flashes to indicate Ethernet activity.
E Ethernet Port
Ethernet Port Ethernet Port
Ethernet Port Accepts either cross or straight Ethernet cable.
F Reset to Factory Default
Reset to Factory DefaultReset to Factory Default
Reset to Factory Default Press for 2 seconds to reset to the factory default
settings. When you reset to the factory default, all your
configuration changes will be removed.

Aztech HL110E Specifications

General

Brand	Aztech
Model	HL110E
Category	Adapter
Language	English