Aztech HL129EP

User Manual
Page 25 of 40
About the HomePlug AV Utility
The HomePlug AV Utility is a software that allows you to manually configure your
HomePlug AV/AV2 devices. It is mainly used for changing the Private Network
Name, detecting other HomePlug AV/AV2’s in the network, and measuring the
throughput of your HomePlug AV/AV2 devices. Installation is straightforward and the
user interface is easy to use.
Note: To use the HomePlug AV Utility, you need a computer using a Windows
operating system with the .NET Framework installed. If you do not have .NET installed,
the HomePlug AV installer will install it for you.
Requirements
Your computer must meet the following requirements:
 Windows XP (32 and 64 bit), Vista (32 and 64 bit), Windows 8 (32 and 64 bit)
 300 MHz Processor
 128 Mb of RAM
 .NET Framework
 Windows Installer 3.1 for Windows XP (32 and 64 bit)
 Network Interface Card
 CD-ROM
 128 Mb of free hard disk space