User Manual
Page 26 of 40
Installation
To install HomePlug AV2 Utility:
1. Insert the Resource CD that comes with HomePlug AV2 into the CD-ROM
drive.
2. Click the Start button, and then click Run.
3. In the Run dialog box, type D:\Setup.exe (where D: is your CD-ROM drive),
and then click OK.
4. Follow the instructions on the installation wizard.
Two applications will be installed in your computer – (1) HomePlug AV Utility
will be installed first followed by (2).NET Framework. The installer detects any
version of .NET Framework in your computer.
If .NET Framework is not installed, a dialog box opens to ask if you would like to
install .NET Framework. Click Yes. The .NET Framework will not be installed if the
required version is already in your computer.
To Next Page
Loading...
