User Manual
Page 31 of 40
This field is case sensitive. It accepts 8 to 64 alphanumeric characters
including punctuation marks but no spaces.
4. Tick the Change Private Network Name of remote device checkbox.
5. Type the Device ID of the remote device. This can be found on the device
label seen on the example provided below.
6. Click Apply. When the process is complete, the message “Settings Applied”
would appear.
After changing the Private Network Name of the remote HomePlug AV/AV2
device, it will no longer be able to communicate with your local HomePlugs
not unless you are using a similar Private Network Name for your local
HomePlugs.
To Next Page
Loading...
