10
1. Open your Internet Browser and go to http://192.168.2.1. On the authentication page,
type admin for both username and password.
2. Click on the Quick Setup button to set up your WL889RT4 for the first time.
3. Choose your current region from the drop-down list.
4. Choose the Internet connection type from the drop-down list.
*Select DHCP to obtain an IP address from your broadband modem automatically. (For
most cable modem users. For Fiber subscriber, tagged, Tick on Enable VLAN and select
your Internet Provider)
*Select PPPoE if your ISP requires a PPP username and password for authentication. (for
most ADSL modem users)
*Select Static if all the IP information is provided to you by your ISP. You need to specify
the IP address, Subnet mask, Default Gateway and Primary DNS.
5. By default, the Wireless Network is enabled. If you wish to disable it, you can simply
To Next Page
Loading...
Need help?
General
