Aztech WL889RT4 User Manual

Aztech
WL889RT4
USER MANUAL
13
Time Zone Setting
Time Zone SettingTime Zone Setting
Time Zone Setting
Select your time zone in the drop-down list.
WAN Interface T
WAN Interface TWAN Interface T
WAN Interface Type
ypeype
ype
Select the type of connection for your Internet Service Provider (ISP).
 DHCP for Cable and Fiber subscribers (For Fiber subscriber with tagged ONT you may need
to tick Enable VLAN and select your respective ISP)
 PPPoE for most DSL subscribers
 Static for fix IP subscription
Internet
InternetInternet
Internet
Enable VLAN to support your current Fiber Service providers from the drop down List.
WLAN Interface Type
WLAN Interface TypeWLAN Interface Type
WLAN Interface Type
Setup you wireless network on this option, enter your SSID (Wifi network name), Encryption type
and wireless network key. Check on Disable Wireless LAN Interface and click Save to disable
wireless function of the router.
Op
OpOp
Operation Mode
eration Modeeration Mode
eration Mode
Here you can setup different modes to LAN and WLAN interface for NAT and bridging function.
Gateway
GatewayGateway
Gateway
In this mode, the device is supposed to connect to internet via ADSL/Cable Modem. The NAT is
enabled and PCs in LAN ports share the same IP to ISP through WAN port. The connection type
can be setup in WAN page by using PPPOE, DHCP client or static IP.

Aztech WL889RT4 Specifications

General

Brand	Aztech
Model	WL889RT4
Category	Wireless Router
Language	English