10
Plan your Extended Network
Before moving ahead to setup the AP, it is a good idea to draw out a network
diagram to help identify your network devices and plan out how to connect these
devices to your AP.
Each port in the device can be used for different connections. For example:
• Ethernet 1 – Main Router
• Ethernet 2 – Laptop
NOTE: If you have a data point in the place where you wish to place your
WMB250AC, one of the Ethernet port can be used for WAN connection to set up
your WMB250AC as AP.
To create a network diagram:
• For wireless devices, identify the wireless devices you want to include in the
network.
• For wired devices, identify which Ethernet port you want to use for each
device.
To Next Page
Loading...
Need help?
General