B2 HVA45TD - AS05: Arc Management Mode; AS06: Overload during test

Test Procedure
© b2 electronic GmbH DHV0086 Rev06 63
Step Procedure (Congureautomaticsequence)
AS04: Work Order
For entering a work order number, activate
the keyboard.
AS05: Arc Management Mode
If “Burn on Arc” is activated, you can set
the duration of burning.
AS06: Overload during test
Set action to be taken in case of overload:
• No Action (default)
• Fail: Runs to end
• Fail. Immed. Stop