B52 MP 5712B - Specifications; General and Tone Specifications; Audio and Radio Specifications

GENERAL
Power Supply Requirements: “DC 14.4V ” Negative Ground
Maximum Output Power: 50W x 4 CH
Chassis Dimensions: 178 x 163x 50mm (W x D x H)
TONE CONTROLS
Bass (at 100Hz): + 10dB / -10dB
Treble (at 10K): +10dB / -10dB
Current Drain: 10A
CD PLAYER
Signal to Noise Ratio: More than 60dB
Channel Separation: More than 60dB
Frequency Response: 20H z - 20KHz
FM RADIO
Frequency Coverage (MHz): 87.5 - 107.9 MHz (U.S.A.)
IF: 10.7 MHz
Sensitivity (S/N-30dB): 12 dBu
Stereo Separation: > 30dB
AM RADIO
Frequency Coverage 530 - 1710KHz (U.S.A.)
IF: 450KHz
Sensitivity (S/N-20dB): 42 dBu
Load Impedance: 4 ohms
Remarks:
Specifications subject to change without notice
SPECIFICATION
17