Babify Swivel 360 Protect - Certification

28
EN
CERTIFICATION
Fresh baby
Tested and certied according to ECE*R44/04
GROUP Body Weight
Swivel 360 Protect 0+/ I 0-18 kg
The child safety seat has ben designed, tested and certied according to the
requirements of the European Standard for Child Safety Equipment (ECE
R44/04).
The seal of approval E (in a circle) and the approval number are located on the
approval label (sticker on the child safety seat).
This approval will be invalidated if you make any modications to the child
safety seat. Only the manufacturer is permitted to make modications to the
child safety seat.
Group 0+/I (0-18kg), ISOFIX+support leg, ISOFIX Semi-Universal
1. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to
Regulation No. 44.04 series of amendments for general use in vehicles
tter with ISOFIX anchorages system.
2. It will t vehicles with positions approved as ISOFIX positions (as detailed
in the vehicle handbook, depending on the category of the child seat and
of the xture.
3. The mass group and the ISOFIX size class for which this device is intended
is: D,B1).
This child restraint is classied for "Semi-universal" use and is suitable for
xing into the seat positions of the following cars.
CAR FRONT REAR
Refer to vehicle list. Outer Centre
No
Yes No