Need help?Do you have a question about the Baby Lock BL4-428 and is the answer not in the manual?
General| Brand | Baby Lock |
|---|---|
| Model | BL4-428 |
| Number of Threads | 4 |
| Stitch Options | Multiple |
| Differential Feed | Yes |
| Differential Feed Ratio | 0.7 - 2.0 |
| Stitch Types | Rolled Hem |
| Buttonhole Styles | Not applicable |
| Stitch Width | Up to 7mm |
| Stitch Length | 1 - 4 mm |
| Presser Feet | Standard |
| Bobbin | Not applicable |
| Number of Needles | 2 |
| Needle Positions | 2 |
Instructions on unpacking, placing and connecting the Baby Lock serger for initial use.
Information on the type and size of needles suitable for the Baby Lock serger.
Procedure for temporarily disabling the upper knife for specific sewing tasks.
Instructions for adjusting the stitch width to a wider setting on the serger.
Instructions for adjusting the stitch width to a narrower setting on the serger.
Procedure to switch the machine from two-thread to three-thread serging.
Procedure to switch the machine from two-thread to four-thread serging.
Instructions for performing three-thread narrow rolled edging on light to medium-weight fabrics.
Instructions for performing two-thread narrow rolled edging on soft fabrics or for picot edges.
Step-by-step guide for replacing the lower knife blade on the serger.
To Next Page