Need help?Do you have a question about the Baby Lock BL450 and is the answer not in the manual?
General| Brand | Baby Lock |
|---|---|
| Model | BL450 |
| Category | Sewing Machine |
| Language | English |
Sets the distance of the needle holder for proper machine function.
Sets the precise clearance between the looper tip and the needle.
Performed checks and adjustments for needle bar and guard.
Adjusts the vertical position and orientation of the needle bar.
Sets the correct position of the needle guard.
Positions eccentric cams for needle bar, lower looper rod, and slide block.
Sets the position of the feed rock eccentric cam.
Sets the position of the upper looper rod eccentric cam.
Adjusts the radius of the lower looper.
Adjusts the timing of the lower looper.
Sets the opening between the lower looper and needle.
Adjusts the timing of the upper looper.
Adjusts the height of the main feed dog.
Adjusts the height of the sub feed dog.
Adjusts the timing of the feed mechanism.
Adjusts the length of the differential feed.
Adjusts the height and direction of the presser foot.
Adjusts feed dog height and differential feed.
Sets the timing for differential feed models.
Adjusts the needle height for optimal sewing.
Adjusts the height of the needle for different systems.
Ensures correct clearance between presser foot and needle plate.
Adjusts the dropped feed dog mechanism.
Adjusts needle height based on organ type.
Adjusts the height of the feed dogs.
Sets the front and back position of feed dogs.
Guides on adjusting differential feed for consistent movement.
Adjusts thread sensor cables for timing accuracy.
A checklist for troubleshooting Jet-Air threading issues.
Diagnoses issues like pump leaks or pipe movement.
Procedures for adjusting and checking various machine parts.
To Next Page