Need help?Do you have a question about the Baby Lock BL-6800 and is the answer not in the manual?
General| Automatic Needle Threader | Yes |
|---|---|
| Foot Control | Included |
| Embroidery Designs | No |
| LCD Screen | No |
| USB Port | No |
Illustrates the main mechanical components and their layout within the sewing machine.
Shows how power is transmitted through various shafts and components for machine movement.
Identifies the location of electronic parts like PC boards, sensors, and switches.
Visualizes the interconnections and flow of signals within the machine's control system.
Explains the control mechanisms for the main motor and other electronic components.
Step-by-step guide to remove external and major internal components of the sewing machine.
Illustrates the routing and connection of internal wiring harnesses for proper assembly.
Details the procedure for safely removing the main printed circuit board assembly.
Adjustments for stitch selection, pattern display, and related unit functions.
Procedures for aligning the timing of upper/lower shafts and belt tensions.
Adjusts the feed dog's height and its front-rear/left-right position for optimal fabric feeding.
Sets the correct thread tension using the dial and a tension gauge.
Addresses issues like skipped stitches, fabric not feeding, or feeding unevenly.
Covers problems with upper and lower thread breaking during operation.
Addresses needle breaks, unusual noise, and fabric gathering problems.
Problems with pattern display, stitch errors, and motor/light failures.
Troubleshooting steps when the lamp does not light up after power activation.
Addresses motor not operating, unstable speed, and starting/stopping issues.
Covers issues related to speed control and the needle's stopping position.
Troubleshooting for reverse switch, foot controller, and buzzer malfunctions.
To Next Page
