Need help?Do you have a question about the Baby Lock Denim Pro BL 18 and is the answer not in the manual?
General| Brand | Baby Lock |
|---|---|
| Model | Denim Pro BL 18 |
| Category | Sewing Machine |
| Language | English |
Instructions for removing and attaching the face cover.
Instructions for removing and attaching the belt cover.
Instructions for removing and attaching the base plate.
Detailed steps for removing and attaching the front cover.
Procedures for removing and attaching the rear cover.
Procedure to check and adjust upper thread tension.
Procedure to check and adjust bobbin thread tension.
Steps to check and adjust presser bar height and alignment.
Procedure for adjusting needle swing for zigzag stitching.
Procedure to adjust needle drop for zigzag width.
Method 1 to adjust clearance between needle and shuttle race.
Method 2 to adjust clearance between needle and shuttle race.
Procedure to adjust the height of the feed dog.
Procedure to adjust the height of the needle bar.
Procedure to adjust needle timing to the shuttle hook.
Procedure to balance feed for buttonhole stitching.
Procedure to adjust feed balance for stretch stitch.
Procedure to adjust bartack feed for buttonholes.
Procedure for disengaging the cam follower.
Procedure to check and adjust motor belt tension.
To Next Page