Need help?Do you have a question about the Baby Lock BL-101 and is the answer not in the manual?
General| Brand | Baby Lock |
|---|---|
| Model | BL-101 |
| Category | Sewing Machine |
| Language | English |
Adjusting the vertical position and direction of the needle bar.
Aligns multiple eccentric cams on the handwheel shaft.
Sets the correct position for the feed rock eccentric cam.
Adjusts the position of the upper looper rod eccentric cam.
Adjusts the timing of the lower looper's movement.
Adjusts the timing of the upper looper's movement.
Sets the correct height for the main feed dog.
Synchronizes the feed dog movement with the needle.
Adjusts the differential feed mechanism for fabric stretching.
Sets the correct height for the sub feed dog.
Calibrates the stitch length mechanism for accurate stitch sizes.
Sets precise clearance between needles and the lower looper tip.
Adjusts feed dog height and differential feed settings.
Sets timing for feed dogs in differential feed models.
Procedure to set the correct vertical height of the needle.
Ensures proper clearance between the lower looper and needles.
Adjusts the clearance and height of the back needle guard.
Sets the correct vertical height of the needles.
Adjusts the dropped feed dog mechanism.
Addresses issues with unbalanced needle threads.
Troubleshoots unbalanced looper threads.
Diagnoses common causes of thread breakage.
Troubleshoots problems with the jet air threader system.
Sets the correct vertical height for the needles.
Sets the distance between the lower looper and needles.
Sets the correct height for the feed dogs.
Adjusts the front-to-back position of the feed dogs.
Checklist for troubleshooting the Jet-Air threading system.
Checks the pump for proper operation and air leaks.
Ensures smooth movement of joint pipes in the threader.
Verifies correct alignment of joint pipes in their receivers.
To Next Page