Care and Maintenance 101
4
6
Use the cleaning brush or a vacuum cleaner to
remove any lint and dust from the race and its
surrounding area.
1 Cleaning brush
2 Race
• Do not apply oil to the bobbin case.
7
Insert the bobbin case so that the projection
on the bobbin case aligns with the spring.
1 Projection
2 Spring
1 Bobbin case
8
Insert the tabs on the needle plate cover into the
needle plate, and then slide the cover back on.
1 Needle plate cover
9
Install the flat bed attachment in its original
position.
a
b
a
b
2
1
1
●
Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XC3153-151), contact
your nearest authorized service center.
●
Be sure that the bobbin case is correctly
installed, otherwise the needle may break.
a
CAUTION
To Next Page
Loading...
