STEP 3.
Mount glide support (D) on each end panel (A),
inserting the wood dowels into the pre-drilled
holes. Secure using 1 1/4” Phillips head screws
(T).
STEP 4.
page 4
STEP 5.
Attach end panel assembly to side panel (B)
using head bolts (W).
T
D
D
U U
U
O or P
Attach the left bearing glide (O) to the left
end panel assembly and right bearing
glide (P) to the right end panel assembly
using 3/8” Phillips head screws (U).
W
Do not overtighten the screws.
Do not overtighten the screws.
To Next Page
Loading...
