Mercer Crib (M6801)- Toddler bed conversion assembly
WARNING:
The minimum age to use toddler bed conversion rail shall not be less than 15 months and the maximum
weight shall not be greater than 50 lbs.
Failure to follow these warnings and the assembly instructions could result in serious injury or death from
entrapment or strangulation. Do not place the bed near windows where cords from blinds or drapes may
strangle a child.
If guard rails are used as the mattress containment means, the guard rails provided must be used.
page 9
The mattress intended for use on the bed is to have minimum dimensions of : 51 5/8 x 27 1/4 x 4 inches thick.
F
XX
STEP 3.
STEP 2.
Unscrew the 4 Allen head bolts (W) and re-
move the front panel assembly (B).
All of the parts and hardware you will need is
supplied with the crib at the time of purchase.
STEP 1.
Move the spring frame to the lowest level.
STEP 4.
Attach the guard rail (F) to the side panel posts using four Allen head bolts (XX).
The guard rail can be installed with the high end facing either to the left or the right.
Check to make sure that all of the bolts are fastened securely. Do not overtighten.
To Previous Page
Loading...
Need help?
General
