Locate the raincover (K). Pull the raincover down over the pram starting at the
top of the canopy and pulling down towards the footrest.
NOTE. The raincover will t in both pushchair and pram mode.
7a. Attach the canopy (I) to the seat unit.
First attach the plastic canopy clips to their respective sides, ensuring
that they sit over the small plastic guides located on each side of the seat unit
frame.
7b. Next, secure the canopy to the frame with the zip. Start with the right side
(when facing the seat).
6. Fasten the apron (H), secure the zip around the side and attach Velcro® over
the bumper bar.
Pram Mode
24 9
Raincover
H
1
2
I
K
To Next Page
