12
PLACE THE CHILD
1. Pull the Headrest Adjusting Handle upward to proper height, making sure
the Shoulder Belt is level with your child’s shoulder;
2. Press the Angle Adjusting Button, then move the child car seat forward or
backward to proper seat back angle. Do make sure the child car seat was set
to right reclining scale before you buckle up and fix the child;
3. Seat the child and position the vehicle belt in front of the child and lock the
belt into the buckle of the vehicle until you hear “click”. When you make sure
the belt is bucked up, place the shoulder belt into Shoulder Belt Guide;
4. The SIP Bumper of the car seat can be adjusted by pulling the SIP Bumper
Controller and make it to the fit width which leaves about one finger space
to both sides when the child is well seated;
5. Please ensure that the lap strap is worn low down, so that the pelvis is firmly
engaged. Pull on the strap until it lies flat and is close against your child’s body.
The straps should be correctly adjusted and ensure they are not twisted.
To Next Page
Loading...
