BabySafe Chart - Refitting the Seat Cover

15
REFITTING THE SEAT COVER
Step ONE: Put on Headrest Cover
1. Put the head rest cover on the headrest and make sure the cover is crammed into
the plastic parts;
2. Cram the cover around the Shoulder Guide into the Guide;
3. Hang the rope of the cover onto the lower side hooks.
Step TWO: Put on the SIP Bumper Cover
1. Cram one side of the SIP Bumper Cover into the plastic part, then glue the macro
onto certain position of the seat back;
2. Do it the same way on the other side, sort the cover.
Step THREE: Put on the Base Cover
1. Put the cover on the base and cram it Into the plastic parts, keep Angle Adjusting
Button exposed outside;
2. Connect the snap-fastener of the cover on the base to proper position, and
cram the extra part of the cover into the SIP Bumper cover.