Need help?Do you have a question about the BAC VXC Series and is the answer not in the manual?
Specifies the operating conditions for BAC cooling equipment.
Requirements for purging the system before operation.
Guidelines for external pipework installation.
General safety measures for operation and maintenance.
Requirements for personnel performing operation and maintenance.
Mechanical safety aspects according to EU directive.
Safety measures for electrical components and installation.
Recommended location for cooling equipment.
Importance of adhering to local installation and operation regulations.
Guidelines for safe disposal of unit parts and refrigerants.
Rules for accessing and maintaining components safely.
Liability for modifications made without BAC written permission.
Details on the product warranty period and coverage.
Explains water evaporation, impurities, blow down, and make-up.
Managing growth of microorganisms like Legionella in the water system.
Guidelines for water treatment chemicals and systems.
Process for passivating galvanized steel surfaces to prevent corrosion.
Explanation of water loss through the overflow connection.
General guidelines for operating in sub-freezing conditions.
Methods to prevent sump water from freezing during cold weather.
Adjusting airflow to maintain water temperature above freezing.
Covers basin inspection, water levels, operating heights, blow down, and sump heaters.
Covers general condition, heat transfer, drift eliminators, water distribution, and fan components.
Procedures for lubricating fan shaft bearings, motor bearings, and motor base.
Steps for mechanical cleaning and disinfecting the cooling system.
Adjust belt tension and ensure proper drive alignment.
Verify fan/pump rotation and check motor voltage/current.
Identify and address abnormal noise or vibration issues.
Importance of a preventive maintenance program for efficiency and uptime.
Actions required when storing units outdoors for extended periods.
Information on contacting BAC Balticare for support and service.
List of recommended codes of practice and guides.
List of relevant websites for industry information.
Note on the manual's original language and translations.
To Next Page
General
