Need help?Do you have a question about the BAC VXI 18 and is the answer not in the manual?
Defines the operational limits, environmental conditions, and fluid compatibility for the equipment.
Covers critical safety, authorized personnel, rigging, pipework, location, and compliance requirements.
Details product warranty terms, limitations, and equipment disposal requirements.
Explains water evaporation, blow down, make-up, and key water quality parameters and guidelines.
Covers managing microbial growth, applying chemicals, and passivating surfaces for system health.
Details overflow connection behavior and water flow considerations within the system.
General guidance for operating equipment in sub-freezing conditions to prevent freezing issues.
Methods to protect sump water and cooling coils from freezing using heaters, insulation, and glycol.
Techniques for adjusting cooling capacity via airflow to maintain safe water temperatures in cold conditions.
Procedures for checking basins, strainers, water levels, motors, noise, vibration, and heat transfer sections.
Maintenance tasks for drift eliminators, water distribution, fan shafts, motors, and pumps.
Guidelines for lubricating bearings and maintaining drive belts, alignment, and locking collars.
Step-by-step instructions for mechanical cleaning and disinfection of the cooling system and its components.
Recommendations for establishing a preventive maintenance program for maximum efficiency and uptime.
Actions required to maintain the unit in 'as shipped' condition during prolonged outdoor storage or severe climates.
Information on contacting BAC support, Balticare, and accessing technical literature and websites.
To Next Page
General
