Instruction 3015-4149 17
SECTION 9
Responding To Alarms
To respond to an alarm from the System Screen, press the button adjacent to the blinking ALARMS field.
This will take you to the Alarm Summary Screen.
The Alarm Summary Screen displays a list of all alarm conditions across the network. Each box
represents a single alarm. If there are more then eight alarms, additional screens can be displayed by
pressing the MORE button.
Each active alarm is indicated by a blinking box. As an alarm is acknowledged the box stops blinking.
To acknowledge an alarm, press the button adjacent to the first alarm box. This will take you to the Alarm
Detail Screen that displays the following information:
• Complete location information
• Refrigerant type and current PPM level
• Peak PPM and peak time
• Type of alarm, alarm time, and date
System Screen
Alarm Summary Screen
To Next Page
Loading...
Need help?
General
