Bachmann E-Z Command User Manual

Bachmann Trains is pleased to bring you E-Z Command.
®
Developed in partnership with Digital Command Control (DCC) innovator
Lenz Electronik, E-Z Command allows you to digitally control the speed, lighting, sound, and direction of several locomotives
independently of each other. But unlike other DCC systems, E-Z Command simplifies the programming process with one-button main
track programming. Other features include 28 speed steps for smooth operation and plug-in wiring for simple set up. E-Z Command
will operate DCC-equipped locomotives from many manufacturers and offers many of the features previously found only on more
expensive digital systems. Best of all, E-Z Command has plug-and-play compatibility with all DC and NMRA-compliant DCC
systems.
Your E-Z Command Digital Command Control System consists of the following components (figure 1):
E-Z Command Control Center
Wall Pack Power Supply
1 Red E-Z Track
®
Track Power Wire
1 Red Universal Track Power Wire
1 Black Interconnecting Power Cable (for use in combination with a DC speed controller)
With its unique plug-and-play capability, E-Z Command is easy to set up and use, whether you’re operating an existing model railroad
or setting up a new layout. To ensure trouble-free operation, however, we recommend that you read this manual completely before
operating your system for the first time.
NOTE: DO NOT CONNECT THE E-Z COMMAND CONTROL CENTER TO THE WALL PACK POWER SUPPLY UNTIL
YOU HAVE MADE THE CONNECTIONS FROM THE CONTROL CENTER TO YOUR TRACK.
1
Setup and Programming Instructions
.
.
.
.
.
CAUTION-ELECTRICALLY OPERATED PRODUCT
NOT RECOMMENDED FOR CHILDREN UNDER 14 YEARS OF AGE. AS WITH ALL
ELECTRIC PRODUCTS, PRECAUTIONS SHOULD BE OBSERVED DURING HANDLING AND USE
TO PREVENT ELECTRIC SHOCK. INPUT: 120 VAC 60Hz. OUTPUT: AC 16V 1000mA

Bachmann E-Z Command Specifications

General

Control System	DCC
Number of Throttles	1
Amperage	1 Amp
Compatibility	NMRA DCC standards
Speed Steps	28

Summary

E-Z Command Setup and Programming Instructions

System Components Overview

Lists the components included in the E-Z Command Digital Command Control System.

Track Connection Guide

Connecting E-Z Track System

Steps to connect the E-Z Track Power Wire to the control center and track.

Connecting Other Track Systems

How to connect the Universal Track Power Wire to non-E-Z Track layouts.

System Power Up Procedure

Instructions for connecting the power supply and turning on the control center.

Locomotive Address Programming

Programming to a Specific Address

How to assign a new address to a locomotive using control buttons.

Reprogramming Existing Addresses

Methods for reprogramming decoders with assigned addresses above or below ten.

Locomotive Operation

Setting Forward/Reverse Operation

How to define and change the default forward direction for locomotives.

Running Multiple Locomotives

Guidelines for operating several locomotives simultaneously on the layout.

Electric Momentum Feature

Explains the realistic acceleration and coasting effect of the system.

Emergency Stop Functionality

How to use the Stop button for immediate train stoppage and resuming operation.

Advanced Programming

Consisting Locomotives

How to group multiple locomotives to run as a single train.

Programming User-Installed Decoders

Steps for programming locomotives with user-installed DCC decoders on a special track.

Function Mode and DC Operation

Using Function Mode

How to access and use function mode for controlling locomotive lights and sounds.

Standard DC Locomotive Operation

Instructions for operating standard non-digital DC locomotives on address 10.

Connecting DC Controller

How to connect a Bachmann DC controller to the E-Z Command Control Center for analog operation.

Troubleshooting and Operating Tips

Train Not Responding

Checklist for diagnosing why a train isn't responding to commands.

Controller and Interference Notes

Guidance on connecting other controllers and managing potential radio interference.