Tender chassis with brake levers and sieve box removed
Tender chassis fitted with brake levers still fitted
Included in these instructions are photographs taken when building the model from the test etch.
Please check our web site http://www.brassmasters.co.uk for further photographs when we super-
detail the model with items from the scrap box.
Miscellaneous parts
14BA nut and bolt 3/8 inch x 2
16 BA nuts and bolts x 6
0.7mm brass wire x 12 inches
0.45mm brass wire x 6 inches
0.33mm brass wire x 8 inches
0.30mm spring wire x 8 inches
Coil wire x 4 inches
Waisted bearings x 6
Medium rivets x 6
Lace pin brass x 1
To Next Page
Loading...
