Back to Basics FB500 User Manual

CLEANING THE DISPENSING VALVE
1. Remove the valve from the blending jar by unscrewing the entire valve counter-
clockwise.
2. Remove the cap from the valve body by unscrewing it counter-clockwise.
3. Squeeze cap and stopper together and slide the lever off the stopper pin.
4. Remove the spring.
5. Remove the stopper and stopper pin by pulling the rubber rim of the stopper.
The stopper and pin are tightly fit and need not be separated.
6. Clean all parts in warm, soapy water, allow to dry thoroughly and reassemble in
the order shown.
Lever
Cap
Spring
Stopper Pin
Stopper
Valve Body
9

Back to Basics FB500 Specifications

General

Brand	Back to Basics
Model	FB500
Category	Blender
Language	English