Backyard Creations BJ390 - Step 5: Attach Table Supports; Step 6: Connect Seat Brackets

8
Step 5: Place table top (H) on a clean and soft level surface. Then attach table top support
brackets (small) (E) and table top support bracket (large) (F) to table top (H)with M6*15 bolt
(M) and steel washer (R) as shown above. Do not overtighten the bolts.
Step 6: Attach left and right seat connecting bracket (G) to table top support bracket (small)
(E) and table top support bracket (large) (F) with M6*35 bolt (P) and steel washer (R) as shown
above, do not overtighten bolts.
9
ASSEMBLY INSTRUCTIONS