STEP 33
Installing the Steering Wheel and Telescope you may
prefer to relocate, but this is where we installed for
reference.
Use a 3/16” Drill bit to pilot drill wall rail and attach
Steering Wheel with 5/16”x 1-1/2” Lag Screw and Flat
Washer.
Attach Telescope base to top of Wall Rail with 1-1/2”
Wood Screws and Then snap Telescope into base.
PAGE 52
ITEMS NEEDED
(1) Steering Wheel 5137-1
(1) Telescope 5147-1
HARDWARE NEEDED
(1) 5/16” x 1 ½” Lag Screw
(1) 5/16” Flat Washer
(2) 1 ½” Wood Screw
To Next Page
Loading...
