Backyard PRO - Step 7: Gas Tank Holder and Hook; Step 8: Side Burner Body Installation

9
Assembly Instrucons
Step 7
Assemble gas tank holder (24) and
gas tank hook (25) on the le leg
using BOLT M6*12 (BB) - 4 PCS.
Step 8
Screw in BOLT M6*12 (BB) - 2 PCS
halfway on the upper corners of the
side burner body (27) as shown in
Fig. 2a.
Slide in the two screws in opening
(Fig. 2b) to hold the side burner body
in posion. Using M6*12 (BB) - 4 PCS,
fasten the side burner body in place
and ghten all screws.