FAQS
WHY IS THE REAR BLUE LED LIGHT ON?
By default the BACtrack operates in the Standalone Mode. If
you do not want to be in the BACtrack App mode, press and
hold the power button for seven seconds to switch modes.
WHY ARE MY RESULTS NOT SHOWING UP
ON THE SCREEN?
You are not in Standalone mode. Hold the power button for
seven seconds to switch modes.
WHY CAN’T THE APP FIND MY DEVICE?
Your BACtrack is not in BACtrack App mode. Hold the power
button for seven seconds to switch modes.
PRECAUTIONS
1. Wait at least 20 minutes after drinking, eating or smoking
before testing. Not observing this waiting period can cause
inaccurate r
eadings and damage the sensor.
2. Do not blow smoke, food, or liquids into the BACtrack
because this will damage the sensor
.
3. Do not test in areas with strong winds, smoke, or in an area
wher
e a large amount of alcohol is being consumed.
4. Avoid testing in the presence of any substances that
contain methyl alcohol, isopr
opyl alcohol or acetone.
These substances may interfere with the results of the test.
5. Replace the AAA alkaline battery when the battery indicator
icon reaches one bar.
Caution: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used battery according to the
instructions.
6. Send your BACtrack in for periodic calibration service as
r
equired. (See Calibration).
7. Your BACtrack is designed to be used in a temperature
range of 32-104 °F (0-40 °C).
8. The BAC results from this product are not admissible
in a court of law
.
9. Do not use your BACtrack as a tool to determine whether
you should operate a motor vehicle or equipment, or
perform any other dangerous act.
10. Do not drink and drive. Always have a designated driver
when alcohol is being consumed.
To Next Page
Loading...
