PAGE 4
SPECIFICATIONS
Category 5´ Bad Boy Cutter
Gear Box 50hp heavy duty Omni RC51
Gear box mount 3/8˝ steel; completely surrounded by interlocking ‘H’ supports
Deck Thickness 1 Piece, 11 Gauge solid welded
Skirt Thickness 3/16˝ steel
Under-decking support 1/4˝ x 6-1/2˝
Skid Shoes 1/2˝ x 2˝ x 32˝ (24˝ of ground contact)
Deck Support Vertical interlocking, welded ‘H’ frame
Lift attachment brackets 1/2˝ solid welded
Tail-wheel arms 1/2˝ x 2-1/2˝ designed to withstand rear tractor wheel lift off
Tail-wheel 4˝ x 15˝ puncture resistant w/ double bolt adjustment
Stump Jumper 15 splined. Heavy-duty, reinforced round stump jumper
Warranty 2 year limited
Weight 650 lbs
Length (including tail-wheel) 100˝
Total Width 63-1/2˝
Overall height 40˝
Deck Height 7˝
Cut Range 2˝–10˝
PTO Drive Shaft Series 5 Shear Bolt or Series 5 Slip Clutch
Blades 1/2˝ x 3˝
Tractor Range 20-55 HP
Cutting Capacity 2˝ diameter
Blade tip speed 16,500 feet/minute
3-Point Hitch Category 1
Blade Spindle 1
Tractor PTO RPM 540
To Next Page
Loading...