PAGE 8
GENERAL INFORMATION
WARNING
The purpose of this manual is to assist you in operating and maintaining your cutter. Read it carefully. It
furnishes information and instructions that will help you achieve years of dependable performance. These
instructions are the product of extensive field experience, engineering data, accident reports, and statistical
data. Although some information may be general in nature due to unknown and varying operating conditions,
through experience and adherence to these instructions, you should be to develop sound operating procedures
suitable to your particular situation.
The illustrations and data used in this manual were current at the time of printing, but due to possible running
changes, your machine may vary slightly in detail. Bad Boy Cutters reserves the right to redesign and change
the machines as necessary without notification.
Throughout this manual, references are made to right and left sides of the equipment. These directions are
determined by standing behind the equipment. Also, blade rotation is counterclockwise. This direction is as
viewed from the top of the cutter.
OPERATION
The operator is responsible for the safe operation of the cutter. The operator must be properly trained.
Operators should be familiar with the cutter, the tractor utilized, and all safety practices before starting
operation.
This standard-duty cutter is designed for grass, weeds, and small brush. Recommended mowing speed for
most conditions is between 2-5 mph.
DANGER
This machine is equipped with front and rear guards. DO NOT operate the machine
without the guards in place.
To Next Page
Loading...